B-07 Repair with simplified LCA
Written on .
| Aspect | B-07 Repair with simplified LCA | |||||||||
|
Description |
The repair module covers all corrective, responsive or reactive treatment of a building product or construction works to return it to a condition in which it can deliver its required functional and technical performance. It covers only the partial replacement of components and building parts (in case of failure), and should be distinguished from the replacement module, which is related to the complete replacement of component and building parts. | |||||||||
|
Related study objective |
☒ stand-alone LCA | ☒ comparative assertion | ||||||||
|
Related study phase |
☒ goal and scope definition |
☐ inventory analysis (LCI) |
☐ impact assessment (LCIA) |
☐ interpretation |
☐ reporting |
|||||
| Relevant for |
new buildings |
existing buildings |
construction products |
screening LCA |
simplified LCA |
complete LCA |
||||
|
Provisions |
Repair is optional in the context of a simplified LCA. For provision and guidance, please refer to the aspect ‘Repair with complete LCA’ of the present document. The reparation procedure refers only to corrective, responsive or reactive actions in response to loss of performances of a building component or building part.
Repair is distinguishable from maintenance and replacement by the following aspects [EN 15804]:
According to EN 15978, the boundary for repair should include:
Water and energy usage related to the repair process should always be included. However, in the context of a simplified LCA, only the production of the replaced component/repaired part need be included. |
|||||||||
|
Rules from |
|
|||||||||
|
Guidance |
Repair is optional in the context of a simplified LCA. For provision and guidance, please refer to the aspect ‘Repair with complete LCA’ of the present document. | |||||||||
B-08 Repair with complete LCA
Written on .
| Aspect | B-08 Repair with complete LCA | |||||||||
|
Description |
The repair module covers all corrective, responsive or reactive treatment of a building product or construction works to return it to a condition in which it can deliver its required functional and technical performance. It covers only the partial replacement of components and building parts (in case of failure), and should be distinguished from the replacement module, which is related to the complete replacement of component and building parts. This aspect of the EeBGuide also addresses the distinction between repair, maintenance and replacement. | |||||||||
|
Related study objective |
☒ stand-alone LCA | ☒ comparative assertion | ||||||||
|
Related study phase |
☒ goal and scope definition |
☐ inventory analysis (LCI) |
☐ impact assessment (LCIA) |
☐ interpretation |
☐ reporting |
|||||
| Relevant for |
new buildings |
existing buildings |
construction products |
screening LCA |
simplified LCA |
complete LCA |
||||
|
Provisions |
The reparation procedure refers only to corrective, responsive or reactive actions in response to loss of performances of a building component or building part.
Repair is distinguishable from maintenance and replacement by the following aspects [EN 15804]:
It should be noted that:
It is thus to be expected that little information related to the repair module will be included in cradle-to-grave EPDs (or cradle-to-gate with corresponding options). Instead, most information would probably be divided between the maintenance module (necessary operations to maintain product performance, including sub-component replacement, in a given set of in-use conditions) and the replacement module (replacement at the end of life of the component). Consequently, the repair module is considered optional in the context of the present guide. According to EN 15978, the boundary for repair should include:
Water and energy usage related to the repair process should always be included. |
|||||||||
|
Rules from |
|
|||||||||
|
Guidance |
Repair is optional in the context of complete LCA in the case of insufficient data. The overall repair scenario should be consistent with respect to the building structure (e.g. replacement of coating is mandatory when replacing the support). In the context of a complete building LCA of an existing building, it is recommended that the repair module be based on the history of the building.
The progressive loss of performance of some components has an impact on the overall behaviour of the building (e.g. loss of performance of insulation may lead to an increase of energy demand due to heating). If sufficient data are available, these aspects should be addressed by using a sensitivity analysis. |
|||||||||
B-09 Inclusion of energy and materials for repair
Written on .
| Aspect | B-09 Inclusion of energy and materials for repair | |||||||||
|
Description |
The inclusion of energy and water use, material use, etc. is framed by standards EN 15804 and EN 15978. The EeBGuide provides additional information and guidance on how (and when) to include or exclude a given aspect of the study. | |||||||||
|
Related study objective |
☒ stand-alone LCA | ☒ comparative assertion | ||||||||
|
Related study phase |
☒ goal and scope definition |
☐ inventory analysis (LCI) |
☐ impact assessment (LCIA) |
☐ interpretation |
☐ reporting |
|||||
| Relevant for |
new buildings |
existing buildings |
construction products |
screening LCA |
simplified LCA |
complete LCA |
||||
|
Provisions |
According to EN 15978, the boundary for repair should include:
Water and energy usage related to the repair process should always be included. However, repair is considered optional. Please refer to the aspects ‘Repair with complete LCA’, ‘Repair with simplified LCA’ and ‘Repair with screening LCA’ for further detail. |
|||||||||
|
Rules from |
|
|||||||||
|
Guidance |
In the context of simplified and screening LCA, only the production of the replaced component or repaired part need be included. Please refer to the aspects ‘Repair with complete LCA’, ‘Repair with simplified LCA’ and ‘Repair with screening LCA’ for further detail. | |||||||||
B-10 Assessment of different repair and maintenance alternatives
Written on .
| Aspect | B-10 Assessment of different repair and maintenance alternatives | |||||||||
|
Description |
The performance of a product often depends on maintenance. However, several maintenance schemes may be developed for the same product, depending on the owner’s requirements and the building specifics. In the case of the repair module, several repair alternatives may also be considered, notably for an existing building. | |||||||||
|
Related study objective |
☒ stand-alone LCA | ☒ comparative assertion | ||||||||
|
Related study phase |
☒ goal and scope definition |
☐ inventory analysis (LCI) |
☐ impact assessment (LCIA) |
☐ interpretation |
☐ reporting |
|||||
| Relevant for |
new buildings |
existing buildings |
construction products |
screening LCA |
simplified LCA |
complete LCA |
||||
|
Provisions |
When considering and comparing several repair or maintenance scenarios, the following items should be taken into account and documented:
The consequences of the repair scenario should be studied (the influence on future maintenance and replacement scenarios, and the impacts on building performance). |
|||||||||
|
Rules from |
|
|||||||||
|
Guidance |
The overall repair scenario should be consistent with respect to the building structure (e.g. replacement of coating is mandatory if repairing the support).
The boundaries of the repair and maintenance modules should be similar in the case of comparison (refer to ‘Repair with complete LCA’ for further guidance). It is recommended that sensitivity analysis be used when comparing different scenarios. |
|||||||||
7.5 Module B4 – Replacement
Written on .
B-11 (Buildings) / B-06 (Products) Definition of the service life of a building product
Written on .
| Aspect | B-11 (Buildings) / B-06 (Products) Definition of the service life of a building product | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Description |
The lifespan, or service life, of building components and elements is usually defined as the period of time during which their performance meets or exceeds initial requirements. More detailed definitions can be found in reference work (e.g. the ISO 15686 series [ISO 15686] and [Guidance Paper F 2004] concerning the Construction Products Directive). Service life depends on many parameters, and is one subject of the ISO 15686 series. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Related study objective |
☒ stand-alone LCA | ☒ comparative assertion | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Related study phase |
☒ goal and scope definition |
☐ inventory analysis (LCI) |
☐ impact assessment (LCIA) |
☐ interpretation |
☐ reporting |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Relevant for |
new buildings |
existing buildings |
construction products |
screening LCA |
simplified LCA |
complete LCA |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Provisions |
The service life of a product or building component has an influence on several aspects of the use stage of building LCA:
The service life of a product or component is influenced by many parameters, notably the indoor and outdoor environments, maintenance level, design of the product, etc. (see ISO 15868-8 for further information). When providing information related to service life for an EPD, ISO 15804 requires that the intended use and in-use conditions of the product or system be specified and documented (EN 15804, Annex A). When developing LCA at the building scale on the basis of several EPDs, it should be verified that the declared service lives and in-use conditions are compatible with the specifics of the building (notably its location and maintenance scenarios). Only end of life related to loss of performance should be taken into account in the base-case scenario. End of life related to obsolescence (e.g. replacement of the product system by a newly developed or more efficient one before the end of life) may, however, be assessed in a complementary assessment. For more information on obsolescence please refer to ISO 15686-1 (Chapter 7). |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Rules from |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Guidance |
The RSL could be based on empirical, probabilistic or statistical data, but should always take into account the intended use (description of use) as described in ISO 15686-1, -2, -7 and -8 [EN 15804, Annex A]. RSL should be determined on the basis of:
It is expected that some service life data may be missing for the assessment at the building scale. In this case, several additional sources may be used to determine the service life of the product or system:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||