Skip to main content

B-06 Repair with screening LCA

Aspect B-06 Repair with screening LCA

Description
The repair module covers all corrective, responsive or reactive treatment of a building product or construction works to return it to a condition in which it can deliver its required functional and technical performance. It covers only the partial replacement of components and building parts (in case of failure), and should be distinguished from the replacement module, which is related to the complete replacement of component and building parts.
Related
study objective
☒ stand-alone LCA ☒ comparative assertion
Related
study phase
☒
goal and scope definition
☐
inventory analysis (LCI)
☐
impact assessment (LCIA)
☐
interpretation
☐
reporting
Relevant for
new buildings

existing buildings

construction products

screening LCA

simplified LCA

complete LCA

Provisions
Repair is optional in the context of a screening LCA. For provision and guidance, please refer to the aspect ‘Repair with complete LCA’ of the present document. The reparation procedure refers only to corrective, responsive or reactive actions in response to losses of performances of a building component or building part.

Repair is distinguishable from maintenance and replacement by the following aspects [EN 15804]:

  • Maintenance is a planned (proactive) action that maintains component performance, whereas repair is a corrective (reactive) action in response to damage.
  • Replacement covers the complete replacement of a component, whereas repair covers only replacement of sub-components.

According to EN 15978, the boundary for repair should include:

  • production of the repaired part of the component and ancillary products;
  • transportation of the repaired part of the component and ancillary products, including production impacts;
  • aspects of any losses of materials during transportation;
  • the process of repairing the part of component and ancillary products;
  • waste management of the removed part of the component and of ancillary products;
  • the end-of-life stage of the removed part of the component and of ancillary products.

However, in the context of a screening LCA, only the production of the replaced component/repaired part should be included.


Rules from
EN 15978
  • 7.4.4.1 General
  • 7.4.4.4 Boundary for repair (Module B3)
  • 8.3 Time related characteristics
  • 8.6.3 Scenarios for maintenance, repair, replacement
EN 15804
  • 6.3.3. Reference service life
  • 6.3.4.4.2 – B3 Reparation
  • 7.3.3.1 B1–B5 use stage related to the building fabric
  • Annex A

Guidance
Repair is optional in the context of a screening LCA, and may be neglected in many cases. For provision and guidance, please refer to the aspects ‘Repair with complete LCA’ and ‘Distinction between Modules B2, B3, B4 and B5 for further guidance’ of the present document.

Lifecycle stage: B (all modules), Lifecycle stage: B3, Related study objective: comparative assertion, Related study objective: stand-alone LCA, Related study phase: Goal and scope definition, Study type: Screening LCA